4.3 ParameterBox panel-mounting type, SK PAR-2E
BU 0750 GB
Technical design subject to change
57
4.3 ParameterBox panel-mounting type, SK PAR-2E
(SK PAR-2E, part no.: 278910110)
The
SK PAR-2E ParameterBox is a compact operating unit designed to be
mounted on a switchboard panel. The terminals provided inside the box allow
for establishing a connection with up to 5 frequency inverters. Type of protec-
tion IP66 is ensured by the front.
The scope of delivery does not include a connecting cable for the Parameter-
Box. To connect the unit, use a standard commercial 4-wire cable with a rec-
ommended cross section of 0.75 mm
2
and follow the general installation in-
structions.
How to proceed with mounting the unit onto the switchboard panel
For installation in the control cabinet door or the control panel, a cut-out of 137mm x 82mm (tolerance
+/- 1mm) must be made. The sealed unit must be inserted in the pre-processed cabinet panel. There are
6 screws (M3 x 7mm) for securing the unit to the interior of the control panel. The ParameterBox
is now
mounted securely on the control cabinet door and has maximum protection class IP66 on the front side if
mounted correctly.
For electrical connection of the SK PAR-2E ParameterBox the terminal bloc 42/40/73/74 can be used with the
panel-mounting type. The exact assignment of the terminals is described in the paragraph below.
137 mm
82 mm
136 mm
162 mm
35 mm
80 mm
35 mm
100 mm
73 mm
146 mm
90 mm
+/-1mm
+/-1mm
Fixing screws
6 pieces M3 x 7mm
(nuts + washers enclosed)
Front of the switch cabinet
The inside of the switch cabinet
Seal
Seal
