NorAM 65ET T4 FINAL, Operator'S Manual

Page: 26 / 194

1
NORAM 65ET GRADER
2-16
General Infor
mation
2
Component Identification and Locations
Seat Belt
Seat belt
(1)
must be worn at all times while operating
the machine. To fasten belt, insert latch plate
(2)
into
buckle
(3)
. If belt is too loose, pull free ends of belt until
belt fits snugly. If belt needs to be lengthened, pull on
buckle or latch plate. To unfasten seat belt, lift up on
buckle release lever.
Rear Axle Components
The limited slip differential axle
(1)
is located in the rear
axle. Torque will be transferred from the wheels on the
side that is slipping to the side with the most traction.
This machine is equipped with a Rollover Protective Structure (ROPS) and seat
belt. The operator must wear the seat belt when operating the machine. The seat
belt helps hold the operator inside the protected area of the ROPS. Failure to
wear the seat belt could result in the operator being thrown from the seat and
crushed if a rollover occurs.
1
3
2
1