22
Figure 18: NORAC Valve Block Details
8.2
Valve Block Mounting
1.
A suitable mounting location for the valve block on the Rogator is illustrated in
Figure 19
.
2.
Insert the threaded rod into the block and use a hex nut to hold the rod. The block holes
are 3/8” NC-1” deep. If bolts are used instead of the threaded rod, ensure the bolts thread
in at least 3/8”.
3.
Use the remaining hardware to secure the block to the sprayer.
4.
Cut off excess threaded rod, if necessary.
Figure 19: Valve Block Mounting
