![background image](http://html1.mh-extra.com/html/norac/uc4-5/uc4-5_operators-manual_1700439021.webp)
17
8.1.6
Boom Geometry Tuning
Exit the cab and manually push either boom tip down 1 – 3 feet (30 – 90 cm) for a moment
and then let go.
Do not walk near the sensors when approaching the boom. Stay at least 3 feet from the
sensor so as not to induce a measurement error.
Note: This step may not be applicable for all sprayer types.
8.1.7
Hydraulic Tuning
Hold the
button to continue the hydraulic tuning. If
is released before "Done" is
displayed, simply press and hold again to continue the procedure.
The panel will display various messages as it is working. The messages are displayed for
informational purposes only.
Release the
button, the hydraulic tuning is complete.
Done
“Done”
Until
Auto
Hold
& let go
ground
near to
boom tip
push
Exit Cab