Nokta Golden King User Manual Download

Page: 7 / 28

Battery

Initial steps to operate the equipment

Preparing and charging the equipment

You are required to charge the battery before initial use.

The battery should be charged for about 3-4 hours. Under normal conditions, the battery

should allow 5-6 hours of operation. For soils containing high density of minerals, this term

reduces down to 4-5 hours.

Note:

The battery charger used on the system is equipped with a special software. Due to

this software, the battery is charged in sequence. For the first several charging operations,

the duration of the operation will be shorter than the normal values. When it is charged

again and again, it will reach to the values indicated above.

The battery box is removed by opening the clamping apparatus on the system box. The

socket of the charger is plugged into the charger input on the battery box. The plug of the

charger is inserted into the wall socket.

Device On / Off Buttons: Turn on the device by pressing the <ON> and turn off the device

by pressing the <OFF> button.

Warning Lights:

When the battery is inserted in the device, if the ON/OFF button is

pressed, all 3 LEDs will blink once in order. When the battery is ON but not inserted

properly in the device, the yellow LED will blink constantly.

Yellow LED:

When the battery is empty, the yellow LED will blink fast and the device will

shut down. When the battery is ON but not inserted properly in the device, the yellow LED

will blink constantly.

Green LED:

While the battery is charging, the LED will stay solid green. When the battery is

fully charged, it will start blinking until the battery is removed from the charger.

Red LED:

While the battery is charging, the RED LED will start blinking in case of

overheating and the battery will stop charging. Disconnect the battery from the charging

adapter, wait for a while for the temperature to drop and then reconnect it. If the

temperature is still high, the RED LED will continue blinking. In such a case, please wait

until the temperature drops to normal level.

Please remove your battery from the device or the charging adapter and contact your

dealer if the RED LED is constantly blinking.

System On/Off Buttons

Charger input

The system

is active

System

Warning

Battery

Full

Summary of Contents for Golden King





























Search results

Summary of Contents for Golden King

Reviews:

Related manuals for Golden King

Brands by name

Popular brands

Nokta Golden King, User Manual

Search results

Summary of Contents for Golden King

Reviews:

Related manuals for Golden King

Brands by name

Popular brands