Ground Balance
What you should do now is to raise the search
coil to 40cm above the ground again. When
you press the «RESET» button, the animated
guide will lower the search coil down to 10cm
above the ground again and so should you.
Each time you lower your search coil to the
ground and press the «CONFIRM» button, the
box with the soil on the left side of the screen will start turning to green.These steps should
continue until the box completely turns to green as shown on the right side. When the box
is completely green, it means that the ground balancing has been completed succesfully.
Please continue these steps until the box with the soil on the left side completely turns to
green. The soil in the box will decrease each time you follow these steps depending on the
mineral composition of the ground. The ground balance will be completed as soon as the
box completely turns to green. You can switch to the search screen by pressing the «OK»
button.
The system will switch to the general detection mode when you press the «OK»button. The
system will not switch to any screen until you press the «OK» button.
MANUAL GROUND BALANCE:
When “MANUAL GROUND BALANCE” is selected, you will see the interface
below.
On this screen, there is a level indicator that can receive
the effect of the ground in both directions, “-” Negative
and “+” Positive. When you hold the search coil above
the ground for the first time, the system is affected from
the mineral level of the ground in the negative or the
positive direction. The purpose is to eliminate this effect
coming from the ground.
Method:
Detection coil is held 10cm. above the
ground. Let's say that we we have
received an effect from the ground in the
positive “+”direction.
Summary of Contents for Golden King
Page 1: ...USER MANUAL ...
