During each power-up, the Golden King Deep Processor Radar
system should be held as shown in the picture. The 'ON' key
should be pressed in this position.
After pressing the 'ON' key, keep your position still for
approximately 20 seconds. Then lower the search coil to the
normal searching height, press 'RESET' and release.
When the above process is finished you can do the ground
balancing and start your search. During this process, the system
adopts itself to the surrounding conditions and makes all the
necessary reference adjustments for better searching.
The quality of the received signal is related directly to its cleanness. The received signal
might be affected from many environmental factors like mineral intensive soils, cold/hot
weather, magnetic (electrical) noises etc. These factors cause the received signal to be
distorted. For this reason, we have developed a new system called D.I.S.S that can clean the
received signal no matter what the reason of distortion is. What we get is always a clean
sinusoid that is easy to process.
Equipment Safety
Especially during transportation, do not forget that this is an electronic device and do not
expose it to harsh impacts.
Waterproofness
The system box of the equipment is not completely waterproof. It should not be exposed
to rain or soaked into water.
Proper Use
The accessories and connection components used on the equipment should be
connected and removed carefully.
Please don't keep the system box over the search coil. The depth of the
system is excessive. Therefore it can sense the system box as a target.
Keep the system box away from the search coil.
Please keep your search coil away from your shoes. The system
can sense the metals in your shoes as a target.
Please do not apply force to the search coil input connector with your
hand when the system is operating. Do not stretch the cable, do not
apply force to the connection socket. In order to interpret the target
signal accurately you must follow the warnings.
WARNINGS
Summary of Contents for Golden King
Page 1: ...USER MANUAL ...