Nokia NSB-7 Series Service Manual Download Page 158

Page: 158 / 308

NSB-7

Service Software Instructions

PAMS Technical Documentation

Page 52

Nokia Mobile Phones Ltd.

Issue 1 06/00

Self Tests... command

Activation

Status Bar Text

Alt, E,S

Open MCU Self-tests dialog box

Command is used for reading self test results and running self tests.

When the selection is made, the test result is read from ME. The test result will be shown
to the user within

MCU Self-test

dialog.

Dialog mode:

modal

MCU Self-test dialog has following items:

Tests list box (ALT+T):

The field “(p)” in the screen example means that the test is also run in power up.
The field “/s)” means that this test is selectable one.

Test states are updated according to results received from the phone. Possible test states
will be one of the next:

• Passed

Summary of Contents for NSB-7 Series



















































































































































































































































































































Search results

Summary of Contents for NSB-7 Series

Reviews:

Brands by name

Popular brands

Nokia NSB-7 Series, Service Manual

Search results

Summary of Contents for NSB-7 Series

Reviews:

Brands by name

Popular brands