manualshive.com logo in svg

Nokia NSB-7 Series, Service Manual

Share
Download
Nokia NSB-7 Series Service Manual Download Page 132

NSB-7

Service Software Instructions

PAMS Technical Documentation

Page 26

 

ã

Nokia Mobile Phones Ltd.

Issue 1 06/00

Yes

 button (ALT+Y or Y):

Replies Yes to a question asked of the user.

No

 button (ALT+N or N):

Replies No to a question asked of the user.

Help

 button (ALT+H):

Opens context sensitive help as F1-key does.

Reporting Status

The status bar will be used to report the present status to the user. When a feature is ini-
tiated, the status bar will be updated with a brief description of the function. The status 
bar will also be updated at key points in a time consuming function.

If an error is to be reported to the user, it will be displayed in the status bar as well as 
displayed in a common error dialog box. This will mean the user is not delayed from pro-
gressing on to the next operation unless an error occurs, in which case, the user will have 
to acknowledge the error by pressing the OK button.

Summary of Contents for NSB-7 Series





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands