Nokia NSB-7 Series Service Manual Download Page 117

Page: 117 / 308

PAMS Technical Documentation

Service Software Instructions

NSB-7

Issue 1 06/00

Nokia Mobile Phones Ltd.

Page 11

Common Properties of the User Interface

This chapter describes how the User Interface CLF (Common Look and Feel) must appear
to the user.

The User Interface MUST be capable of being driven without the use of a mouse, as the
service engineer rarely has space on the bench to use a mouse.

Login Dialog

When the Service Software application is invoked, by checking on the Service Software
icon, the Login dialog box will be displayed on the screen.

Nokia logo and application name

bitmap (-)

Displays Nokia logo and name of the application.

Application version

static text (-)

Contains the name and version of the application.

Copyright notice

static text (-)

Login Box

edit box (-)

The user Login ID edit box, where the user enters his/her faultlog user name.
(See Faultlog User Guide)

Nokia logo and
application name

Application version

Summary of Contents for NSB-7 Series



















































































































































































































































































































Search results

Summary of Contents for NSB-7 Series

Reviews:

Related manuals for NSB-7 Series

Brands by name

Popular brands

Nokia NSB-7 Series, Service Manual

Search results

Summary of Contents for NSB-7 Series

Reviews:

Related manuals for NSB-7 Series

Brands by name

Popular brands