Nokia IP1200 Series, Installation Manual

Page: 119 / 156

Nokia IP1200 Series Security Platform Installation Guide 119
8
Installing and Replacing Other
Components
This chapter provides information about how to add or replace field-
replaceable units (FRUs) other than network interface cards (NICs) in your
Nokia IP1200 Series Security Platform. The following topics are covered:
„ Replacing a Hard Disk Drive
„
Replacing or Upgrading Memory
„
Installing a Nokia Encryption Accelerator Card
„
Installing a Fan Unit
„
Installing or Replacing a Power Supply
„ Monitoring the Nokia IP1200 Series Security Platform Power Supply
For information about how to add or replace NICs, see Chapter 4, “Installing
and Replacing Network Interface Cards.”
You should have a working knowledge of networking equipment before you
attempt to service an IP1200 Series. Limit service of the appliance to the
procedures described in this chapter.
Caution
To protect the IP1200 Series and the memory modules from
electrostatic discharge damage, make sure you are properly
grounded before you touch these components. Use a grounding
wrist strap and follow the instructions provided with the wrist strap