Nokia IP1200 Series, Installation Manual, Page: 45 / 156

Performing the Initial Configuration
Nokia IP1200 Series Security Platform Installation Guide 45
on your network is configured to respond to any request). To reset the
incorrect host name and IP address:
a. Establish a console connection to the system.
b.
Enter the following:
rm /config/active
or
mv /config/active /config/active.old
c.
Reboot the appliance.
d. Respond to the Hostname? prompt within 30 seconds to prevent the
DHCP client from restarting.
3.
At each subsequent prompt, enter the requested configuration
information.
For more information about how to respond to the prompts during the
initial configuration process, see the release notes for the Nokia software
release you are running.
4.
When you are prompted to select an interface, Nokia recommends that
you select one of the Ethernet management interface ports.
To select an interface, enter the number adjacent to the physical ID in the
list of connected interfaces.