149
©2000 Nokia Mobile Phones. All rights reserved.
SIM change security (Menu 4-3-5)
The same settings can be found in the Security settings. See ”Security” on
page 113.
Change access codes (Menu 4-3-6)
In this submenu, you can change the lock code, the PIN code, the PIN2
code and the barring password. See ”Security” on page 113.
The access codes may only include the digits 0 to 9.
System lock (Menu 4-3-7)
To lock the communicator, press
Select
and enter your lock code. The
communicator locks immediately. Even if you remove and replace the
battery and switch on the phone, the communicator will remain locked.
To unlock the communicator, press
Unlock
and enter the lock code.
Restore factory settings (Menu 4-4)
You can reset the settings of the menu functions to their original values.
When you activate this setting, you will be prompted for your five-digit lock
code. This function will not affect stored phone numbers and names, access
codes, earpiece volume setting, call timers, cost counters, selected application
tones or short messages.
Call divert (Menu 5)
The call divert network service allows you to direct your incoming voice calls
to another phone number when you do not want to be disturbed, or when the
phone is switched off or outside the network coverage area. The call diverting
functions are described in more detail in ”Telephone settings” on page 53.
1
Scroll to one of the following divert options and press
Select
:
Divert all voice calls
Divert when busy
Divert when not answered
Divert if not reachable
Divert all fax calls
Divert all data calls
Cancel all diverts
2
Scroll to
Activate
. You will be asked for the phone number to which you
wish to divert the incoming calls.
The
Cancel
option sets the divert mode off.
Status
shows what kind of calls
are being diverted.
Um_spock3.bk Page 149 Thursday, June 1, 2000 10:11 AM
