Nokia 10i, Installation Manual

Page: 24 / 48

2
Installing a Nokia 5i and 10i Gateway
24 Nokia 5i and 10i Installation Guide
Table 3 describes the connections on the rear panel of the Nokia 5i and
Nokia 10i.
Resetting the Gateway to Factory Default
A reset button is located on the rear panel and is used to reboot and reset the
Nokia 5i and 10i gateways.
Caution
T
he following action results in the loss of all security services and
passwords.
Table 3 Rear Panel connection descriptions of the Nokia 5i and Nokia 10i
Label Description
Console The console port is a 9-pin male connector that can be connected
to the serial (COM) port of the computer or network device. You
can then use the command-line interface (CLI) through a serial
program such as HyperTerminal to communicate with the device.
3 Ethernet port (RJ-45) used for connecting computers or other
network devices.
2 Ethernet port (RJ-45) used for connecting computers or other
network devices.
1 Ethernet port (RJ-45) used for connecting computers or other
network devices.
Auxiliary The auxiliary port (AUX) or dial-in port is a 9-pin male connector.
This port is used to dial in to the Nokia 5i and Nokia 10i through a
modem when the Nokia 5i or Nokia 10i is unreachable through
other ports.
Power A power jack for supplying power to the device. Connect the
power adapter to this jack.