Nokia 10i, Installation Manual

Page: 21 / 48

Site Requirements
Nokia 5i and 10i Installation Guide 21
Site Requirements
Before you install a Nokia 5i or 10i gateway, ensure that your computer room
or wiring closet conforms to the environmental specifications listed in
Appendix A, “Technical Specifications,”
Warning
Hazardous radiation exposure can occur if you use controls, make
performance adjustments, or follow procedures that are not described in
this document.
Warning
An explosion can occur if the battery is incorrectly placed. Replace only
with the same or equivalent type battery recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Warning
To reduce the risk of fire, electric shock, and injury when you use
telephone equipment, follow basic safety precautions. Do not use the
product near water.
Caution
For gateways intended for shipment outside of the United States, the
cord might be optional. If a cord is not provided, use a power cord
rated at 6A, 250V, maximum 15 feet long, made of HAR cordage and
IEC fittings approved by the country of end use.