Noblelift PTE15Q, Instruction Manual

Page: 24 / 27

22
9. TROUBLE SHOOTING
 IF TRUCK HAS MALFUNCTIONS, FOLLOW THE INSTRUCTIONS IN CHAPTER 6.
Table 9: Trouble shooting
TROUBLE CAUSE REPAIR
Load can’t be
lifted
Load weight too high Lift only the max. capacity, mentioned on the ID-plate
Battery low power Charge the battery
Lifting contactor failure
Check and contact with service support for replacement if
necessary
Hydraulic oil level too low Check and eventually refill hydraulic oil
Oil leakage Repair the sealing of the cylinder
Oil leakage
from air
breathing
Excessive quantity of oil. Reduce oil quantity.
Truck not
starts
operating
Battery is charging
Charge the battery completely and then remove the main
power plug from the electrical socket.
Battery not connected Connect the battery correctly
Fuse faulty Check and eventually replace fuses
Low battery Charge the battery
Emergency switch is
activated
Turn the emergency switch clockwise
Tiller in the operating zone Move the tiller firstly to the braking zone.
If the truck has malfunctions and can’t be operated out of the working zone, jack the truck up and go with
a load handler under the truck and safe the truck securely. Then move truck out of the aisle.