Noblelift PTE15Q, Instruction Manual

Page: 20 / 27

18
It’s also allowed to remove the battery out and charge in dedicated area.
If there is an optional second battery, the truck can continue to work after replacing the battery, and
charge the battery that needs to be charged separately.
Table 4: LED-Status
Table 5: Charger (PTE15Q)
8. REGULAR MAINTENANCE

Only qualified and trained personnel are allowed to do maintenance on this truck.

Before maintaining, remove the load from the forks and lower the forks to the
lowest position.

If you need to lift the truck, follow chapter 4b by using designated lashing or jacking
equipment. Before working, put safety devices (for instance designated lift jacks,
wedges or wooden blocks) under the truck to protect against accidental lowering,
movement or slipping.
 Please pay attention by maintain the tiller arm. The gas pressure spring is
pre-loaded by compression, carelessness can cause injury.
 Use approved and from your dealer released original spare parts.

Please consider that oil leakage of hydraulic fluid can cause failures and accidents.

It is allowed to adjust the pressure valve only from trained service technicians.
If you need to replace the wheels, please follow the instructions above. The casters must be round and
free of abnormal wear.
Check the items emphasized in maintenance checklist.
LED - Signal Function
Red Charging
Green Fully charged
Model Specification Input Output
DZL300SS02 24V8A (EN LABEL) 180Vac -240Vac
～
3.0A MAX 29.4V 8.0A
SSLC300V29 24V8A (EU) 180Vac -240Vac
～
3.0A MAX 29.4V 8.0A
SSLC300V29 24V8A (USA)
120Vac
～
3.0A MAX
29.4V 8.0A
WTL2412PMF 24V12A
100Vac -240Vac
～
6.0A MAX
29.4V 12.0A