8
Pallet Truck
Type
xxxx
Rated capacity
xxxx
kg
Rated voltage
xx
V
Service
weight
without battery
xxxx
kg
Battery
weight
maximum
xxx
kg
Battery
weight
minimum
xxx
kg
Net weight (without
load and battery)
xxx
kg
Lift
height
maximum
xxxx
mm
Serial number
XXXXXXXXXX
Serial number
XXXXXXXXXX
Manufacturing Name XXXXXXXXXXXXXXX
Manufacturing Name XXXXXXXXXXXXXXX
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
DO NOT
Put foot or hand under or into the lifting mechanism.
Allow other person than the operator to stand in front of or behind the truck when it is
moving or lifting/lowering.
Overload the truck.
Put foot in front of the wheels, injury could result.
Lift people. People could fall down and suffer severe injury.
Push or pull loads
Side or end load. Load must be distributed evenly on the forks.
Use the truck with unstable or unbalanced load.
Use truck without manufacturer
’
s instructions manual.
Lifted loads could become unstable at wind forces. In the case of wind forces do not
lift the load if there is any influence to the stability.
Watch difference in floor levels when driving. Load could fall down or the truck could get uncontrollable.
Keep watching the condition of load. Stop operating the truck if load becomes unstable.
Brake the truck and activate the emergency switch (5) by pushing when sliding load on or off the truck. If
the truck has any malfunctions, follow chapter 10.
Practice maintenance work according to regular inspection. This truck is not designed to be water
resistant. Use the truck under dry condition. Prolonged continuous operation might cause damage of the
power pack. Stop operation if temperature of hydraulic oil is too high.
Fig. 4: Identification plate
Check the ID plate taped on the truck for contents and type.
Summary of Contents for PTE15Q
Page 6: ...4 b Technical data Fig 2 Technical data...
Page 27: ......