60
corrosion.
3
）
Instrument display in standby mode;
Power switch is on the rear side of the charger, turn on the power switch of the
charging equipment, charging equipment is on with indicator lights, display shows
welcome screen as shown in the graph, charger will enter into the standby mode after
self-checking, showing the battery voltage, current and charging power, due to
charging gun is not connected to the truck at this time, so state of charging displays
"Please connect the battery".
4
）
Complete the charging connection and the normal charging display
Remove the charging gun, insert the gun into the body end lithium battery
charging socket, charger will complete the self-checking and communication with the
lithium battery, when there is no fault for the whole system, the charger internal relay
will work, charging indicator is on, and the instrument will display the charging voltage,
charging time and charging current and fault information.
5
）
Charging end display and power off operation
When the lithium battery is full, the charger will automatically stop charging, at this
time, the green light indicating the battery has full voltage and output meter on the
output current is 0, then press the pause button, then unplug the charger gun (Note:
the charging gun head is integrated with the lock button as shown in Figure (b) must
be pressed to be normal plug operation), winding gun line, out back the charging gun
If the lithium battery is not fully charged, it is necessary to press the stop
button. When the charging current is reduced to 0 (A), the charging gun head
can be pulled out.
Cover the charging cover and the door of the forklift, turn off the charger power
and end the charging.
Caution: to avoid serious personal injury, the following precautions
should be taken when the forklift is charging!
Do not touch the charging terminals or metal terminals in the charger head.
When there is lightning, do not charge the vehicle or touch the vehicle.
Lightning strikes may cause damage to the charging equipment and cause
personal injury.
After the end of charging, do not use wet hands or stand in the water to
disconnect the charging device, because this may cause electric shock,
