3
Introduction
This manual briefly describes the technical parameters of the counterbalanced accumulator
forklift made by our company, and the structure of its main components, working principle and
requirements on operation and maintenance. Please read this manual carefully before operation,
so as to achieve proper driving and maintenance, and to ensure safe and effective material
handling. Meanwhile, this manual aims to guide operators to use the forklift in an appropriate way
and to maximize its performance! We hope that operators and equipment managers could read it
carefully before use! Please strictly observe the provisions and cautions stipulated in this manual
and operate the forklift with caution and care, so that the forklift can be maintained in its best
status and optimal performance can be ensured. When you lease or transfer your forklift, always
keep this manual with it.
For highlighting purpose, the following icons are used in this manual:
1.
----
Refers to a potential danger; if not avoided, it may cause serious human injury, vehicle
damage or fire.
2.
----
Refers to a potential danger; if not avoided
，
it may cause minor human injury, or local
damage to the vehicle.
。
3.
----
Refers to general cuations and instructions during use.
Most parts of the product are made from recyclable steel. The recycling and disposal of
cast-offs resulted during use, maintenance, cleaning and disassembling of the product has to
comply with local regulations without pollution to the environment. The recycling and disposal of
the cast-offs should only be operated by specialised personnel in the designated area. The
cast-offs, such as hydraulic oil, batteries and electronic units, if improperly disposed, may be
hazardous to the environment and human health.
The internal accuracy of the measuring chain for at 21X at ± 0,02 m/s2. Further deviations may occur
in particular through the positioning of the sensor and different driver weights.
The vibration acceleration acting on the body in its operating position is the linearly integrated,
weighted acceleration in the vertical axis according to the standard. It is calculated when travelling over
thresholds at constant speed (standard truck version). These recordings were taken on a single occasion for
the truck and must not be confused with the human vibrations of the operator directive.
4
）
The normal use of the product's environmental requirements as follows: no more than
2000 meters above sea level and the temperature range of+5 ° C - +40 ° c, humidity should
no more than 90%.The wind speed is not more than 5m/s.
If you need to use in the freezer for a long time, Or in special environment, it is needed
to install special attachments. Please contact our technical staff.
5
）
Product recall serive is available when serial faulties occur.
Due to continuous product improvement, Noblelift reserves the right to make changes in
product designs and specifications without prior notice. For the latest product parameters, please
feel free to contact us. All parameters provided herein are as of the publication date of the
Instruction Manual.
