43
(13) Check instrument panel features
Normally, after a few seconds turn the key switch, the dashboard will be the following graph
shows
1. hourmeter
2. Wheel Angle indication (optional) 3. Operating mode indication
4. Speed indication
5. Battery power display
6. Forward and backward indication
（
14
）
Check the overhead guard and load backrest
Check whether there are loose bolts or nuts
(15) Check the integrity of vehicle identification
(16
）
Others
Check whether abnormalities other parts
In addition to checking lights and operating conditions, the key switch must be
turned off and disconnect the battery plug before check the electrical system.
Ⅱ、
Check after operation
After the completion of the work remove the dirt on forklift and check the forklift according to
the follow items
：
(1) Check all the parts if there is damage or leakage.
(2) If there is deformation, distortion, damage or breakage?
(3) Add lubricating grease according to the situation.
(4) Let fork upgrade to the max hight for several times after work. (When the daily work is not
up to the fork with the arrival of the maximum height of the situation, it would allow oil flow through
the tanks of the entire journey, to prevent rust.)
(5) Replace the faulty component which caused malfunction during work.
·
A small mistake will cause a major accident. Do not operate or move the forklift truck
before completion of repair work and inspections.
Ⅲ、
Truck cleaning
