14
(c) Rub anticonosive oil on bared surface of piston rod and shaft ect.
(d) Cover parts prevent raining and wet.
(e) Startup vehicle at least once a month, install battery, clean the grease on piston and shaft,
startup engine and preheating, make vehicle move forward and backward slowly, meanwhile
operating hydraulic control for several times.
(f) In summer, do not park forklift on floppy furface such as asphalt ground.
(4) Operation after long time deposit.
(a) Take off dampproof cover.
(b) Cleaning pickling oil from bared parts.
(c) Cleaning impurity and water of hydraulic tank.
(d) Install full charged battery on forklift andconnect it.
(e) Check carefully before startup.
Ⅱ、
Using instruction of operating devices
1. Components,schematic diagram for operating devices
（
see following figure
）
1. rearview mirror
2. overhead guard
3. multiple valve control lever
4. rear combined lamps
7. battery cover
．
rear wheel
14. Parking brake switch
15.front wheel
16. instrument
17. tilt cylinder
18.fork
19. Load-backrest
20.mast
21.lifting cylinder
22.lifting chain
23.steering lamp
24.headlamp
