41
(5) Check hydraulic system and frame function
Check the upgrade and after dumping the normal operation is smooth
(6) Check pipeline
Check lift cylinder, tilt cylinder, and all pipeline whether oil leak.
(7) Check the hydraulic oil
Land the fork to the ground, check oil level gauge hydraulic oily bits,
when the oil level in the H to the L range, the volume of hydraulic point oil
suitable range.
(8) Check the lifting chain
Bring fork to the ground 200-300mm high, to ensure the tightness around
the same chain. Check finger stick is in the middle, if different tightness
can be adjusted through the chain joints.
·After adjustment, should be double nuts tighten.
(9) Check tires (pneumatic tires)
Unplug the nozzle cap, measuring tire pressure with a tire air pressure. After check air
pressure, nozzle mouth should ensure that gas will not leak before installed the cap.
·Forklift tire pressure is higher than the car’s; it should not exceed the prescribed
pressure value.
model
H
L
FE4P16-2
0Q
2
0
L
1
6
L
model
tyre pressure
fore tyre
18×7-8
solid tyre
rear tyre
5.00-8-10PR
0.9MPa
content gage
Oil box
