Nobili TB 151, Operator'S Manual

Page: 46 / 100

44
Maintenance and storage
TB 151/181/211
Shredders
- Remove filler plug (6).
- Place a container with a capacity of at
least 0.9 L (0.23 US gal) under plug.
- Remove drain plug (5).
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (5). Replace it if
necessary.
- Pour the correct oil quantity and quality through the
opening of the filler plug.
- Reinstall filler plug (6).
- Reinstall central gearbox.
- Reinstall attachment bolts (4). Tightening torque:
10 daN m (74 lbf ft).
- Reinstall adjustment screws (3).
- Reinstall pulley (8).
- Check that pulleys are in line and that upper and lower
shafts are parallel. Readjust if necessary. See
section:
• Belt tension
• Parallelism of the transmission shaft.
- Remove the 3 drive belts (7).
- Adjust belt tension.
- Reinstall side guards.
- Check central gearbox oil level:
• The oil must reach the lower edge of the filling hole
(6).
5
6