Nobili TB 151, Operator'S Manual

Page: 35 / 100

Instructions for work
33
TB 151/181/211
Shredders
2. Adjustments in working position
„
Working height
The working height is mainly set by the roller height:
- Lift the machine slightly off the ground.
- Unscrew 2 bolts 1.
- Remove bolts (2).
- Place roller in holes (3) corresponding to the required
adjustment.
- Reinstall the 2 bolts (2), torque:8 daN m (59 lbf ft).
- Tighten bolts (1).
„
Height of the tractor's lift linkage
- Lower the tractor lift linkage until the rear roller
touches the ground.
- Adjust lift linkage height to obtain a perfectly
horizontal position.
The cutting tools must never touch the
ground.
Relationship between the working height and the
roller position:
Holes (1)= 22 mm / 0.9’’
Holes (2)= 45 mm / 1.8’’
Holes (3)= 70 mm / 2.8’’
1
2
3
1
2
3
For an adapted setting, adjust lift linkage height
until lower edge of offset arm lower part is
parallel to the ground.
Avoid modifying the linkage height to tilt the
machine frontwards.
When tilting the rear part of the machine
downwards, there is an increased risk of
material being ejected towards the operator.