Nobili TB 151, Operator'S Manual

Page: 16 / 100

14
Safety
TB 151/181/211
Shredders
„
Precautions for machine use
Before using the shredder, inspect cutting tools (knives,
hammers, flails) and their attachment hardware in
accordance with the instructions given in the present
manual. Immediately replace any worn, damaged or
missing cutting tool or element. For your safety, only use
genuine parts !.
Check the guards regularly. Immediately replace any
damaged or missing element.
Before engaging the PTO drive, lower the machine on
the ground. Make sure all the guards are in place. Keep
all persons and animals away from the danger zone.
Stay a safe distance from the machine when the cutting
tools are in movement.
Never work in reverse.
After the power source has stopped, the rotors can
continue turning for a time. Stay away from the machine
until all moving parts have come to a complete standstill.
If an obstacle is hit, disengage the PTO drive, stop the
tractor engine, remove the ignition key and wait for all
moving parts to come to a complete standstill. Check the
entire machine for any damage before resuming work.
„
Precautions to take to prevent rotor from
clogging
Foreign bodies in the field (wire,...) can cause clogging.
Avoid shredding close to roads, dumps or inert material
dumps.
To eliminate cloggings, take the following safety
measures:
- Switch off the engine.
- Lift the machine using the tractor's lift linkage.
- Put on gloves and protective glasses.
- Wait until all rotating parts have come to a complete
stop.
- Checked concerned parts for overheating.
- Prop up frame using trestles.
- Remove foreign body with adequate equipment(lever
and pliers).