8. Handling
The boxes fit into each other, which makes it possible to stack them very compactly. Larger
volumes of BW102 are delivered in plywood cases measuring 2.15 x 1.47 x 1.14 meters
(85” x 58” x 44”). Each case contains 32 boxes, or approx. 29 meters (95’) of boxwall. The
cases are also intended for storing the boxes.
The cases are opened from the front. Start by loosening the seven buckles that hold the
front in place. Then gently pull out the top of the front using the handle. Then lift the entire
front, and remove it. Now all the boxes can be taken out, first the 16 on the right, then the
16 on the left.
The lid can also be removed, but it is not necessary. With the lid in place, the short sides are
also kept in place. The short sides and the backside are fixed and cannot be removed.
7 (8)
NOAQ BW102 1.0 201201
Also the loading of the case is made from the front, first
the 16 boxes that should stand to the left, then the 16
that should stand to the right.
A bar on the floor of the case helps to steer the first one
of the 16 right hand boxes in place. This box should
rest against the bar and be pushed all the way to the
backside of the case.
Using a special carrying stick the boxes can easily be
carried to wherever you want to have them.
