NMC-WOLLARD MB-4 200-DF, Operation, Maintenance And Parts Manual

Page: 273 / 321

Group 10
General Information
10
1
DPSG,YZ07927,80 –19–21JUN99–1/1
SPECIFICATIONS
Item Measurement Specification
2000 Series Transmission Oil Hydraulic transmission fluid.
-
Filter Remote mounted spin-on type filter.
-
Transmission Operating Conditions Maximum input speed (3000 rpm)
-
Test input speed (2000 rpm) at a
converter out temperature of 40.6—
51.7
°
C (105—125
°
F).
-
Maximum continuous operating
temperature 93
°
C (200
°
F)
-
Maximum intermittent temperature
110
°
C (230
°
F)
-
Maximum temperature 121
°
C
(250
°
F)
-
Normal operating temperature 71—
93
°
C (160—200
°
F)
-
Check oil level temperature 71—
93
°
C (160—200
°
F)
-
Pressures and Flows at Control Port # 2 (Refer to Setting The Clutch
Valve. All pressure and flow tests Pressure in group 100) Pump
must be accomplished at 2000 rpm pressure is higher than clutch
at a converter out temperature of pressure, not to exceed clutch
40.6—51.7
°
C (105—125
°
F). pressure by 105 kPa (15 psi)
-
Pump out flow at 2000 rpm, 40.6—
51.7
°
C (105—125
°
F) is 74.5 Lpm
(19.6 gpm) (Refer to “PRESSURE
AND FLOW CHECKS AT OTHER
LOCATIONS” group 100).
-
Converter out flow at 2000 rpm,
40.6—51.7
°
C (105—125
°
F) is 64.6
Lpm (17 gpm) (Refer to “PRESSURE
AND FLOW CHECKS AT OTHER
LOCATIONS” group 100).
-
Converter out pressure at full throttle
stall is not to be less than 241 kPa
(35 psi) at 82.2—93.3
°
C (180—
200
°
F) (Refer to “PRESSURE AND
FLOW CHECKS AT OTHER
LOCATIONS” group 100).
-
Port #1 (Refer to Setting The Clutch
Pressure in group 100) Clutch
pressure 1655—1790 kPa (240—260
psi)
-
Port #3 (Refer to “SETTING THE
CLUTCH PRESSURE” and
“PRESSURE AND FLOW CHECKS
AT THE VALVE”in group 100)
Converter in pressure 585 kPa (85
psi)
-
Lube, in pressure at 2000 rpm,
40.6—51.7
°
C (105—125
°
F) is not to
exceed 170 kPa (25 psi) or be less
than 70 kPa (10 psi) (Refer to
“PRESSURE AND FLOW CHECKS
AT OTHER LOCATIONS” group
100).
-
Towing Do not exceed 5 km/h (3 mph)—Tow
no further than 2 km (1 mile)
-
Voltage Requirements See group 100 “CLUTCH
SOLENOID VOLTAGE
REQUIREMENTS”
CTM195 (28JUL99)
10-1
2000 Series Transmission
072899
PN=15