Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 49 of 111
3.9.1.2.6
Configuring the Edge Router DTLS list
Click on
DTLS List
in the
Configuration
section.
On this page, the user can load certificates and configure the DTLS list.
User actions available on this page:
Load
: The user will select one of the three radio buttons (ClientCert, ClientKey, or CA Cert), will choose a
local .pem file, and then will load the certificate on the router.
Add
: The Mac, Cipher Suit, and DTLS Key fields will be validated and a new entry will be added to the
table.
Remove
: The rows with the checkbox checked will be removed.
Apply
: The changes will be saved on the router.
Cancel
: The pending changes will be removed and the table will be reloaded from the router.
Select from table
(by clicking in the checkbox or on the row): The selected MAC Address or Range will be
loaded in the textbox from above; the corresponding Cipher Suite will be loaded in the drop down list
from above; and the DTLS key will not be loaded. Also, the selected device details will be bolded in the
table.
Update
: If the user will edit the loaded data (or input a new key), the Add button will be renamed
Update and will trigger the update in the table.
