Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 45 of 111
3.9.1.2.2
Configuring the Edge Router Connectivity settings
Click on
Connectivity
in the
Configuration
section.
This allows the user to choose between statically allocated IPv4/IPV6 and dynamically allocated IPv4/IPv6 (by
DHCP) for the Edge Router; set the static IPv4/IPv6, network mask, gateway, and DNS; and change the
HTTP/COAP Proxy port.
WARNING: This page is for advanced users only – do not use
it unless you know precisely how to configure the
network. Any invalid values may render the router dysfunctional, or may cause difficult-to-trace malfunctions.
NOTE
Make sure you are not causing IP conflicts when you make changes.
