Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 16 of 111
3.3
Verify the Cell backhaul starts up properly
1.
This section only checks whether the cell connectivity is
stable
(meaning SIM was properly
configured with an active data plan). It does
not
check whether the Titan is
accessible
over cellular
link or whether Titan
can access
the NMS.
2.
Power off Titan
3.
Remove Titan ETH connection
4.
Make sure a properly configured and activated SIM card is inserted in titan SIM slot
5.
Power on Titan
6.
Wait for about 2-3 minutes for Titan to boot up
7.
Check whether Titan “WEB” blue LED is solid on – and stay on for more than a minute without
turning off.
3.4
Verify the Cell backhaul works using NMS
1.
Have available and running a NMS instance
2.
Have Titan connected over ETH
3.
Power on Titan
4.
Set Titan in “transparent” mode, connecting it to the instance mentioned above
5.
Power off Titan
6.
Remove Titan ETH connection
7.
Make sure a properly configured and activated SIM card is inserted in titan SIM slot
8.
Power on Titan
9.
Check whether Titan is accessible from the NMS Web interface
3.5
Verify the Cell backhaul works using the cell IPv4 accessible from the PC
1.
The procedure below works ONLY if the cell provider has assigned an IPv4 accessible from the PC to
the SIM card.
o
One case is when the IPv4 associated with the SIM card is accessible from the Internet.
o
Another case is when the PC itself has an IPv4 provided by a cell modem using a SIM card in
the same private IP class as SIM on Titan.
2.
Power off Titan
3.
Remove Titan ETH connection
4.
Make sure a properly configured and activated SIM card is inserted in titan SIM slot
5.
Power on Titan
6.
Check whether Titan Web interface is accessible using the cell provider-assigned IP4
