16 / 32
scd340en21p07
P01: - - 1 a Measurement Mode
FACTORY DEFAULT: 11
Values transmitted by HART protocol, current output and the switching points of the relays will be interpreted into the engineering units of the
(measured or calculated) process value corresponding to the programmed measurement mode. On the other hand, the higher the “a” of the
programmed parameter value the more (measured or calculated) process values can be transmitted through HART (e.g., if P01=0 only the
Distance, if P01=4 Distance, Level and Volume; Exception: P01=2 or 4.) (
P10, P11
)
a
M
EASUREMENT
M
ODE
T
RANSMITTED PROCESS
VARIABLES
P
RIMARY VARIABLES
TRANSMITTED THROUGH
HART
O
THER VARIABLES TRANSMITTED
THROUGH
HART
0
Distance Distance
DIST
Secondary:
LEV
Tertiary: DIST
Quaternary: Temp
1
Level
Level
LEV
2
Level in percent
LEV%
3
Volume
Volume
VOL
4
Volume in
percent
VOL%
Summary of Contents for EasyTREK SCD-31 4 Series
Page 1: ...scd340en21p07 1 32...
Page 2: ...2 32 scd340en21p07...