Nitto Construction
- 32 -
6. Operating Instruction for CTS-02V4 Body
6.1 Installing of Batteries
・
Four packs of Size AA batteries are used
for the power supply.
・
Open the slide gate of the battery pack
(Fig.6.1-1) on the reverse side of the
measurement instrument.
・
Install the batteries in the right direction
in terms of positive and negative
electrodes.
・
It is possible to use different brands or
types of batteries.
Fig.6.1-1 Battery Pack
※
Installing the batteries in wrong direction in terms of the electrodes may
lead to damages
of the battery pack and the instrument. Please refrain from combination of old and new or
different types of batteries (ex. manganese and alkaline batteries).
6.2
Connection of Hammer Unit
・
Although the instrument body and the
hammer unit are already connected, the
hammer unit is removable.
・
Hold the grip firmly and withdraw the cable
slowly when removing the hammer unit.
・
Plug the hammer unit connecter into the
receptor of the instrument body.
・
There exist a direction in the receptor and
connector. Check the shape of the receptor
and connector and plug the connector into
the receptor carefully.
・
CTS-02V4 can be stored as connected the
instrument body and the hammer unit.
・
It is necessary to remove the hammer unit
only in special circumstances. Otherwise,
you don’t need to remove it.
※
The connector will not detach by simply pulling the cable. Do not pull the cable. It may
cause breaking of cable and other problems.
Fig.6.2-1 Instrument Body and Hammer Unit
Summary of Contents for CTS-02V4
Page 1: ...CTS 02V4 User Manual...
