Nitto Construction
- 29 -
5.5.3
Displaying of Waveforms
・
When clicking [Show Wave Form] button
⑤
, dialog of displaying waveform is appeared as
shown in Fig.5.5.3-1.
・
Please refer to the list of the name of button and its function as shown in Table 5.5.3-1.
・
The first waveform at the measurement point will be displayed in this dialog.
・
The measured waveform number, estimated strength value and Index value are displayed at
the top of the dialog (shown in red box of Fig.5.5.3-1).
※
These values are recalculated by the program of PC and may be different slightly from the
measured values with CTS-02V4. It can be checked in this dialog whether the waveform is
measured accurately or not.
Fig.5.5.3-1 Dialog of Displaying Waveform
Table 5.5.3-1
List of Name of Button and its Function
Name Function
Back
To display the previous waveform.
Next
To display the next waveform.
+
To enlarge waveform.
Init
To display the initial waveform (all measured data).
Exit
To exit the dialog.
Summary of Contents for CTS-02V4
Page 1: ...CTS 02V4 User Manual...
