Nitto CTS-02V4, User Manual

Page: 3 / 37

Nitto Construction
A strap is to put the instrument around shoulder in order to prevent the
instrument from dropping. An allowable load is 1 kg. Do not use to put
anything else around shoulder.
It may cause injury.
Do not remove the screw attaching a strap. It may cause injury by dropping
the instrument and also cause failure of the instrument by dropping the
screw inside of the instrument.
Do not put the instrument on unstable place. It may cause injury by
dropping.
● Usage
The hammer unit is made of metal and is a “hammer” object. Improper
usage such as brandishing may cause injury and damages.
Do not disassemble the instrument. It may cause injury and failure of the
instrument. Disassembling will void the warranty of the instrument.
Do not use the instrument at any places that are at risk of spilling water,
chemicals etc. It may cause a fire or other disasters.
Do not use anywhere gas is ignited. It may cause fire or explosion.
Misuse of the batteries may cause contamination around a case by leakage of
battery fluids and a fire or injuries by explosion. The following restrictions
are extremely important.
1. Do not use the combination of different types of batteries such as
manganese and alkaline batteries.
2. Please refrain from combining old and new batteries.
3. Please install the batteries in the right direction in terms of positive and
negative electrodes.
4. Please remove the batteries from the instrument when left unused for a
long period of time.
Stop immediately using the instrument if it starts to smoke or smell oddly.
Turn the power of the instrument off, remove the batteries and contact our
company.
The hook of the instrument attached to the strap can only support the mass
of the instrument itself. Do not carry heavy goods on the hook. It may cause
injury or failure of the instrument by dropping the instrumrnt.