Rotary auxiliary hopper SH300
2
2. Use environment, installation, connection, and power-on
2.1. Use environment
WARNING
Satisfy the conditions required for the operating environment.
Otherwise, fires, electric shock, or faults may occur. Use this product at a 1000 m or
less height in ordinary indoor environment, satisfying the conditions shown below.
• The environmental temperature is within a range from 0 to 40
C
• The relative humidity is within a range from 30 to 90%RH, free from freezing or
dew condensation
• Free from corrosive or flammable gas
• The atmosphere is free from conductive powder, including iron powder
• Well-ventilated and free from dusts
• Free from soot
• No vibration or heat source is nearby placed
• No flammable is nearby placed
• No fluid, including water, is splashed with the product
• Free from strong electric or magnetic field
• Easy to be checked or cleaned
• Far from cables connected to welding machines or others
2.2. Installation
Install “SH300” in the following procedure:
(1) Catch the basket at the rear of the main unit of “FF/FM503H” with the left and right hooks of the
“SH300”.
(2) Insert the pole with a rubber foot into the “SH300” main unit so that the hopper does not fall down
even when the screws are put in.
* In principle, install the “SH300” to the “FF/FM503H”.
(For more information, refer to
“Vibratory Track Screw Feeder FF/FM503H Instruction Manual”.)
Hook
Basket
Pole
