Rotary auxiliary hopper SH300
WARNING
OFF
Shut down the power immediately if an abnormal state occurs.
If any abnormal state such as smoking or bad smell occurs, turn off the illuminated power
switch (SW1) and shut off the power to the product. And then contact our sales agent or your
nearest sales office of Nitto Seiko Co., Ltd. for repair. If you continue using it without repair,
a fire, electric shock or accident may occur.
WARNING
Before carrying out wiring, be sure to check that the power is shut off.
Otherwise, a fire or accident may occur.
CAUTION
CAUTION
Be sure to use the fuses designated by us.
Otherwise, fires, electric shocks, accidents, or malfunctions may occur.
CAUTION
In principle, connect the plug of the “Power cable with a plug” of this product only to
the 3P receptacle (CN SH) of the Vibratory Track Screw Feeder “FF/FM503H”.
Otherwise, a fire, electric shock, accident, or failure may happen.
CAUTION
When installing this product to a high place, provide measures against tipping and
dropping.
Otherwise, you may suffer from injuries, or the machine may be damaged or malfunctioned.
CAUTION
Do not touch the free bare and the spur gear that contacts with the hopper and the
hopper while the machine is running.
Otherwise, you may suffer from injuries, or the machine may be damaged or malfunctioned.
CAUTION
The hopper is removed from the main body easily. To carry the unit, the hopper should
be removed from the main body and should be carried separately.
Otherwise, you may suffer from injuries, or the machine may be damaged or malfunctioned.
