- 21 -
it could be used.
If you use SATA/USB 2.0 device but your system does not support SATA/USB 2.0
transfer port, SATA/USB 2.0 interface PCI controller card is available for purchased
from us.
3-7 Operational guide when using Macintosh operating system
If VANGUARD IIIS hardware installation has been completed, you can turn on the
power again and connect this device to Macintosh.
1. Connect USB 2.0 cable to Macintosh operating platform that supports this device. For
examples, MAC G3, G4, G5, iBook
2. In case you’d like to connect SATA cable to Macintosh operating platform, SATA
interface PCI control card required.
3. Please connect power cord to power jack in the back of VANGUARD IIIS
4. Turn on the power of VANGUARD IIIS and confirm whether the display on computer
screen is normal.
5. Turn on the power of Macintosh platform
6. Given that installation of driver for USB 2.0/SATA has been completed for Macintosh
platform,
7.Turn on the power of Macintosh platform
8. And confirm VANGUARD IIIS and USB 2.0 or SATA device are ready, till
operational.
Steps to perform partition and formatting on RAID drive are as follow:
Formatting (just like formatting function of PC)
