- 20 -
11. Press ”
” button once, screen will display “SETUP PASSWORD OK.”
3-6 Operation Guide when using Windows operating system.
If VANGUARD IIIS hardware installation has been completed, you can turn on the
power again and connect this device to PC.
1. Please connect power cord to power jack on the back of VANGUARD IIIS.
2. Connect USB 2.0 or SATA cable to the connection port of Windows operating
platform that supports this device.
3. Turn on the power of VANGUARD IIIS and confirm whether the display on
computer screen is normal.
4. In a few seconds, system will automatically detect this device.
5. Verify and confirm whether the icon of this device is listed in the task bar of
Windows desktop.
When VANGUARD IIIS and USB 2.0 or SATA device is ready and your set up to
specify the RAID operation mode is done, perform partition and formatting procedures
on the hard-disk using disk management tool in control panel of operating system before
