- 10 -
3. Turn on the power of Vanguard IIIS (power switch is on the back of the unit)
4.Make sure the primary disk and the second disk are ready which will be indicated by
the “OK” message on LCD screen, before turning on the power of computer system,
please refer to illustration below.
Caution: Prior to connecting USB 2.0 or eSATA transmission cable to computer, confirm
in advance whether the mechanism supporting USB 2.0 or eSATA on computer’s main
board is ready on the control panel. If the computer system is not equipped with this
interface, they are available for purchased from a NitroAV.com Partner.
