- 18 -
※
How to Change the function from Schedule backup to RAID 1 mode
1. Please enter to the ”SCHEDULE BACKUP” operation mode on the LCD screen again.
2. Please adjust the time days to become "00" and make sure them input the system under
Schedule backup operation mode. (As The next screen appears with ”SCHEDULE
BACKUP TIME 0->30 (DAYS) 00”, please following the service manual chapter 3-3 )
2.If you finish the above steps, please restart the power of Vanguard IIIS to ensure the
days parameters are embedded then RAID 1 will be enabled.
Notice.
1.
The parameters had been embedded under Vanguard IIIS, please should be
restart the Power to ensure the setting is enable.
2. Complete the above procedure and restart the power, the system will become
the RAID 1 mode. If you want to change from RAID 1 to RAID 0, please
refer to the service manual chapter 3-2 )
3
－
4 Steps for changing password
In order to avoid involuntary modification of parameters, VANGUARD IIIS features
personal pass word function so that data is better protected by the manager. But please be
aware, once pass word is changed, the new pass word must be written down, if it is lost, it
will create difficulties for the manager.
