NITEO TOOLS
EN
NITEO TOOLS
47
Check that the pressure line is not broken or damaged.
Check that the unit is supplied with running water at the correct
pressure.
Check that the nozzle, spray gun extension or spray gun are not
blocked by dirt - if so, clean them.
Pressure is
irregular.
Check that the unit is supplied with running water at the correct,
constant pressure - problems can be caused by a hydrophore
installation.
Check that the nozzle, spray gun extension or spray gun are not
blocked by dirt - if so, clean them.
Water leaks from
the connectors
between
elements
Minor leaks are acceptable - they result from the design of the
device and accessories.
In the event of heavy leakage, stop using the device or the
accessory in question - contact the manufacturer's helpline.
Despite the
installation of the
container for
detergent with
foamer on the
nozzle, no foam
is produced
Check whether the container for detergent with is attached
properly.
Check if there is a detergent in the container.
Check that the detergent supply hose is properly seated in the
container and that it is unclogged.
Check that the foam nozzle is not dirty or clogged.
If the problem persists, contact the manufacturer's service department.
STORAGE OF EQUIPMENT
If you are not going to use the device for a long time, after turning it off with the power
button, cooling it down, winding the power cord and pressure hose, and cleaning the
device and its accessories, store it in a dry room away from heat and moisture sources.
It is best to place the device in its original packaging, away from children and pets. Do
not expose the unit
to temperatures below 0°C as freezing water can damage the unit
components.
TRANSPORT OF THE DEVICE
It is recommended to transport the device in its original packaging after it has been
switched off with the power switch and cooled down; its electric cord and pressure
hose wound up, the device itself and its accessories cleaned. Do not expose the unit
to excessive vibration or shock during transportation. When handling, only carry the
unit after it has been switched off and cooled, holding it securely by the handle. It is
11. STORAGE AND TRANSPORT