NITEO TOOLS
EN
NITEO TOOLS
31
•
To disconnect the unit from the power supply, always pull the mains
plug, not the power cord.
•
Ensure that the power cord is never crushed, bent too strongly, or
exposed to sharp or hot surfaces that could damage it. Guide the
power cord so that it does not subject anyone to tripping or losing
baspray gun extension. Always fully unwind the power cord before
using the device and inserting the mains plug into the socket.
•
The plug and extension connector must be watertight and must not
lie in water, wet grass, etc. The connector must not lie directly on the
ground. It is recommended to use cables on special reels that
ensure that power sockets are placed at least 5-6 cm above the
ground.
•
The electrical connection may only be made by an authorised
electrician. The electrical connection should meet the requirements
of applicable law.
•
For safety reasons, connect the device to the mains with a residual-
current device with sensitivity max. 30 mA.
•
Disconnect the unit from the power supply before cleaning and
maintaining the device and also after every use.
•
If the power cord is damaged, it should be replaced. To avoid danger
it should be done by the manufacturer, service technician or by a
qualified person.
•
The device should be
protected against temperatures below 0°C.
•
The device cannot be connected directly to the water supply
system.
•
To avoid endangering life and health of the users, in the event of
damage to the device or any of its components, return it
immediately to an authorized service center or contact
manufacturer's service department.
•
Protect the device from flooding. Every time a cable or appliance
gets wet, even when it is switched off, the user is exposed to electric
shock. Never immerse the device in any kind of fluid. If, for any
reason, any kind of fluid enters the housing of the unit, immediately
unplug the mains plug from the mains socket and take the unit for
