NITEO TOOLS
EN
46
NITEO TOOLS
After spraying the surface with detergent, preferably from the bottom to the top, take
off the detergent container with foamer and rinse the detergent after the activation
time specified by its manufacturer.
9. CLEANING AND MAINTENANCE
Cleaning of the unit may only be carried out when the unit is switched off and has
cooled down; the mains plug is unplugged from the mains socket; water has been cut off,
and the water hose and power cable are wound up.
The device requires no maintenance.
Do not immerse the device in any kind of liquid.
Do not use aggressive, chemical or abrasive cleaning agents to clean the device.
The device may only be cleaned with a dry cloth or paper towel. In the case of heavy
soiling of the body it is permissible to use a cloth slightly moistened with lukewarm
water and heavily wrung from its excess. Afterwards, wipe the cleaned area
immediately with a dry cloth or paper towel and leave the device to dry.
After dismantling, the accessories can be washed with a cloth soaked in water with
the addition of a delicate, non-concentrated detergent and wrung out of excess water.
If the nozzle gets soiled with sand, earth or other substances, you can clean the hard
parts using a brush or other tools, making sure not to use too much force as the
moving parts of the jet control mechanism can be damaged.
10. PROBLEMS
In case of problems with the device, please refer to the following tips.
I cannot switch
the device on
Check the correct connection to the power supply.
Check the plug or power cord for damage.
Check whether the electrical outlet is damaged - select another
one.
Check whether the trigger safety button ist switched on.
The device does
not work but you
can hear the
engine of the
pump.
A voltage drop in the mains or a defective power cord/extension
cable.
Too low pressure
Check if the pump and hoses are deaerated.
