NITEO TOOLS
EN
NITEO TOOLS
37
8. USE
BEFORE THE FIRST START
All installation, disassembly, cleaning and maintenance operations should be carried
out only when the appliance is disconnected from the mains and water supply.
All operations should be carried out gently so as not to damage the components.
Unpack the device. Check whether any of the components are damaged. Before
installation, lay all the necessary components on a flat surface.
CONNECTION TO WATER SUPPLY
All water supply company regulations must be observed.
Use a fabric reinforced water hose with a commercially available coupling. Minimum
diameter 13 mm (1/2 inch); minimum length 5 m (not included).
Do not connect the appliance to a water supply without backflow preventers. Water
that has flowed through backflow preventers is considered non-pottable.
INSTALLATION OF THE COMPONENTS OF THE DEVICE
You will need a Philips-type screwdriver to tighten certain parts of the device. It is not
included.
Regulated nozzle
Container for
detergent with
foamer
Spray gun
Spray gun extension