You can press Space+m (1-3-4 + Space) to mute all alarm beep, and press again to enable alarm beep in the Tools and
sub-menu. You can press Space+r(1-2-3-5+Space) to restore settings.
2.8.1 Power Menu
tls>power
This shows the power source and battery capacity. If your Mini Seika is not charging, it will display “not charge xx%”.
When the battery voltage is low, the Mini Seika will alarm three tone every 15 minutes. When you plug in the adapter,
t h e
M i n i S e i k a
w i l l b e e p
t w o t o n e
a n d d i s p l a y “ u s b c h a r g i n g ” . W h e n t h e b a t t e r y i s c h a r g e d f u l l y , t h e
Mini Seika will beep three tone, and it will display “usb charged full”.
Press Space +e (1-5 + Space) or Enter or Joystick Left to exit..
2.8.2 Update
tls>update
This feature allows you to update the firmware. You need to download the update BIN file onto the USB disk, and plug
it into Mini Seika USB slot. Press Enter and the Mini Seika will update the firmware, and itt will take about 8 seconds.
After the update is complete, it will beep twice and display “pls restart”. Then turn off the Mini Seika and restart.
N
ote
1: Do not remove the
USB
disk or turn the power
off
when updating the
firmware or
the Mini Seika firmware will be corrupted.
37
