NIMO ETS 1500, User Manual, Page: 9 / 20

9
5
4 7
6
3
230 mm
1
2
1450 mm
1. Supporting bracket
2. Pre-drilled holes
3. Attachment screw with washer
4. Plastic plug
5. Wall behind the drying cabinet
6. Spacer
7. Drying cabinet back wall
The illustration
shows model
ETS 1500
_____________________________________________
The drying cabinet must be installed and kept indoors.
_____________________________________________
____________________________________________
The drying cabinet must not be installed where high-
pressure water jets are used for cleaning.
____________________________________________
The drying cabinet can conveniently be installed
above a front-loading washing machine.
____________________________________________
However, it must hang on the wall and not placed directly
on top of the washing machine. This is to avoid vibration
when the washing machine is running. A supporting
bracket is supplied with the drying cabinet.
____________________________________________
1
Mark up for the supporting bracket and secure it to the wall
with screws. Screws are supplied in the installation kit.
2 Hang up the cabinet.
The cabinet must be secured to the wall to prevent it tipping
forward.
3
Open the door and drill 8 mm holes in the wall through the
four pre-drilled holes in the rear of the drying cabinet.
4 Insert plastic plugs in to the holes in the wall. Place a spacer
on the screw and install with a washer as shown in the il-
lustration. Screws are supplied in the installation kit.
____________________________________________
WARNING!
The drying cabinet must not be used unless
it is fixed to the wall, due of the risk of tip-
ping forward.
____________________________________________
POSITIONING
INSTALLATION