NIMO ETS 1500, User Manual, Page: 8 / 20

8
2

1
3
4
MAN
60° 40°
-
+
MAN 40° 2:30 C
START STOPP
ON OFF
ECO DRYER

REHANGING THE DOOR
The door can be hinged on the left or the right.
1
Lay the dryer down on its back.
2
Open the door fully and support it in its open
position using a chair or similar. The door must
not be opened more than 180°.
3
Release the four screws retaining the
control
module. The screws are on the top of the
control module.
4
Slant the module out so as to gain access to
the lower hinge pivot pin.
5 Close the door.
6
Release the
lower pivot pin
using a set
spanner and remove the door.
7 Release the upper pivot pin with a
screwdriver and move the pin over to the
opposite side. First release the plastic plug
and press it in on the opposite side.
8 Rotate the door, offer up the door and screw
it in place with the
lower pivot pin.
9
Refit and retighten the screws on the control
module.
1. Control module
2. Upper hinge pin
3. Screwdriver
4. Lower hinge pin
FITTING THE DOOR HANDLE
Fit the door handle with the fixing screws supp-
lied.
The illustration shows
model ETS 1500
______________________________________
WARNING! The plug must be unplugged from
the wall socket.
______________________________________
INSTALLATION