NIMO ETS 1500 User Manual Download Page 13 | Manualshive

Page: 13 / 20

NIMO ETS 1500 User Manual Download Page 13

13

1

2

ELECTRICAL CONNECTIONS

The drying cabinet should be connected to a 230
V 1-phase 50 - 60 Hz grounded socket.

The drying cabinet is supplied ready for connec-
tion with a cable with a grounded plug.

______________________________________
The drying cabinet should be connected using

the plug supplied to a grounded wall socket, and

should not be in the form of a fixed connection!

______________________________________

______________________________________
The socket should be placed so that the plug can

be easily removed when required.

______________________________________

______________________________________
Appliance must be connected to a dedicated

circuit.

______________________________________
____________________________________
The drying cabinet must not be connected using

an extension cable as the necessary safety cannot

be guaranteed (risk of overheating).

______________________________________
______________________________________
Check that the supply current matches that sta-

ted on the name plate and that the mains lead

is grounded correctly according to standards in

force. We recommend that the mains lead be fitted

with a

residual current device (RCD).

______________________________________

______________________________________
The manufacturer shall not be held liable if the

electrical connections are not carried out as pre-

scribed in this manual.

______________________________________

1. The dryer from underneath
2. Fixed flexible connection cord

INSTALLATION

«
...
11
12
13
14
15
...
»

Summary of Contents for ETS 1500





















Reviews:

No comments