NIMO ETS 1500 User Manual Download Page 15

 

15

USING THE DRYING CABINET

STARTING

1

  Place the articles to be dried in the drying 

cabinet and shut the door. See the section 

’Positioning the washing’.

2

  Set an appropriate temperature and drying 

time. See the section 

’Settings’.

In the cabinet there are three sections with hang-
ers. Every section has a number of rods on which 
to hang the washing.
The optimised hanging system has extendable hangers. 

p

  Hang the articles in the drying cabinet according 

to how much room they require - not according 
to their weight.

p

  For optimum efficiency - do not lay articles 

flat on the upper hanging section.

p

  Place long clothes nearest to the walls of the 

cabinet and shorter ones towards the centre. 
By hanging the washing in this way the most 
efficient drying results are attained.

p

  Do not overload the drying cabinet. The washing 

will become creased and dry unevenly. Instead, 
leave a certain distance between items of wash-
ing, if this is possible.

p

  To avoid the transferring of colours make sure 

materials do not contact each other.

p

  Avoid drying thick clothes at the same time as 

lighter articles as they hold more moisture and 
have completely different drying times.

p

  Remember not to hang knitted articles. These 

can be stretched when they are heavy with 
water.

POSITIONING THE WASHING

USER TIPS

Setting the controls

p

  Set the temperature and the time selector knobs 

for the most delicate articles to be dried.

p

  The temperature is changed by means of 

the temperature selector knob which can be 
turned in both directions.

Drying

p

  Always follow the washing instructions on 

clothes if such instructions are available.

p

 If a softening agent or antistatic substance is 

used, the manufacturer’s instructions concerning 
the utilisation of the product should be followed.

p

  Take out washing that is already dry. This reduces 

drying time for the washing that is left.

_____________________________________

NOTE: 

  The sealing strip in the door may not 

function satisfactorily when cabinet is 

cold, however as soon as cabinet warms 

up, it will once again function.  

_________________________________________________

AIR FLOW

The figure shows 
the airflow in the 
drying cabinet.

Keep the area 

around the evac-

uation duct clear 

of dust and dirt. 
Make sure that 

the air intake and 

exhaust air duct 

are not blocked.

 

The illustration 

shows model 

ETS 1500 

Summary of Contents for ETS 1500





















Reviews: